DentalCare Logo

Digital Dentures

Course Number: 662

References / Additional Resources

  1. Chappuis Chocano AP, Venante HS, Bringel da Costa RM, Pordeus MD, Santiago Junior JF, Porto VC. Evaluation of the clinical performance of dentures manufactured by computer-aided technology and conventional techniques: A systematic review. J Prosthet Dent. 2023 Apr;129(4):547-553.

  2. Baba NZ, Goodacre BJ, Goodacre CJ, Müller F, Wagner S. CAD/CAM Complete denture systems and physical properties: A review of the literature. J Prosthodont. 2021 May;30(S2):113-124.

  3. Alotaibi HN. Patient satisfaction with CAD/CAM 3d-printed complete dentures: A systematic analysis of the clinical studies. Healthcare (Basel). 2025 Feb 11;13(4):388.

  4. Jafarpour D, Haricharan PB, de Souza RF. CAD/CAM versus traditional complete dentures: A systematic review and meta-analysis of patient- and clinician-reported outcomes and costs. J Oral Rehabil. 2024;51:1911-1924.

  5. Srinivasan M, Kalberer N, Fankhauser N, Naharro M, Maniewicz S, Muller F. CAD-CAM complete removable dental prostheses: a double-blind, randomized, crossover clinical trial evaluating milled and 3D-printed dentures. J Dent. 2021; 115:103842.

  6. Kunnath Menon R, Yew HX, Chen Tze Wei B, Mohammed Ramadan F, Ibrahim Soliman A, Veettil S. CAD-CAM vs. conventional denture bases: A systematic review with network meta-analysis of in vitro studies comparing strength, hardness, toughness, and elastic properties. Front Dent Med. 2025 Aug 11;6:1638794.

  7. Rojas-Rueda S, Floriani F, Abuhammoud S, Mohammed A, Afrashtehfar KI, Jurado CA. CAD-CAM complete dentures manufactured using additive and subtractive manufacturing techniques: A feasible clinical approach for managing geriatric patients with advanced residual ridge resorption. Case Rep Dent. 2025 Sep 26;2025:9813868.

  8. Janeva N, Kovacevska G, Janev E. Complete dentures fabricated with CAD/CAM technology and a traditional clinical recording method. Open Access Maced J Med Sci. 2017 Oct 6;5(6):785-789.

  9. Feng Y, Feng Z, Li J, Chen J, Yu H, Jiang X, Zhou Y, Zhang Y, Huang C, Fu B, Wang Y, Cheng H, Ma J, Jiang Q, Liao H, Ma C, Liu W, Wu G, Yang S, Wu Z, Bai S, Fang M, Dong Y, Wu J, Niu L, Zhang L, Wang F, Niu L. Expert consensus on digital restoration of complete dentures. Int J Oral Sci. 2025 Jul 30;17(1):58.

  10. Thu KM, Molinero-Mourelle P, Yeung AWK, Abou-Ayash S, Lam WYH. Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review. J Prosthet Dent. 2024 Nov;132(5):922-938.

  11. Chebib N, Imamura Y, El Osta N, Srinivasan M, Müller F, Maniewicz S. Fit and retention of complete denture bases: Part II - conventional impressions versus digital scans: A clinical controlled crossover study. J Prosthet Dent. 2024 Apr;131(4):618-625.

  12. Soboleva U, Rogovska I. Edentulous patient satisfaction with conventional complete dentures. Medicina (Kaunas). 2022;58(3):344.

  13. Smith PB, Perry J, Elza W. Economic and clinical impact of digitally produced dentures. J. Prosthodont. 2021;30:108-12.

  14. Arakawa I, Al-Haj Husain N, Srinivasan M, Maniewicz S, Abou-Ayash S, Schimmel M. Clinical outcomes and costs of conventional and digital complete dentures in a university clinic: A retrospective study. J Prosthet Dent. 2021 Feb 17:S0022-3913(20)30799-X.

  15. Anadioti E, Musharbash L, Blatz MB, Papavasiliou G, Kamposiora P. 3D printed complete removable dental prostheses: a narrative review. BMC Oral Health. 2020 Nov 27;20(1):343.

  16. Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. Int J Prosthodont. 1994;7(1):17-21.

  17. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. J Prosthet Dent. 2012;107(1):34-46.

  18. Maragliano-Muniz P, Kukucka ED. Incorporating digital dentures into clinical practice: flexible workflows and improved clinical outcomes. J Prosthodont. 2021;30:125-32.

  19. Deng K, Chen H, Wang Y, Zhou Y, Sun Y. Evaluation of functional suitable digital complete denture system based on 3D printing technology. J Adv Prosthodont. 2021;13(6):361-72.

  20. Lo Russo L, Zhurakivska K, Guida L, Chochlidakis K, Troiano G, Ercoli C. Comparative cost-analysis for removable complete dentures fabricated with conventional, partial, and complete digital workflows. J Prosthet Dent. 2022 May 31:S0022-3913(22)00204-9.

  21. Tew IM, Soo SY, Pow EHN. Digitally versus conventionally fabricated complete dentures: A systematic review on cost-efficiency analysis and patient-reported outcome measures (PROMs). J Prosthet Dent. 2025 Apr;133(4):998-1007.

  22. Jurado C, Sayed M, Fu CC, Villalobos-Tinoco J, Tsujimoto A. Computer-aided design and computer-aided manufacturing (cad/cam) complete dentures for atrophic alveolar ridges: Workflow combining conventional and novel techniques. Cureus. 2022 Jan 10;14(1):e21093.

  23. Mubaraki MQ, Moaleem MMA, Alzahrani AH, Shariff M, Alqahtani SM, Porwal A, Al-Sanabani FA, Bhandi S, Tribst JPM, Heboyan A, Patil S. Assessment of conventionally and digitally fabricated complete dentures: a comprehensive review. Materials (Basel). 2022 May 28;15(11):3868.

  24. Bonnet G, Batisse C, Bessadet M, Nicolas E, Veyrune JL. A new digital denture procedure: a first practitioners appraisal. BMC Oral Health. 2017 Dec 20;17(1):155.

  25. Janeva NM, Kovacevska G, Elencevski S, Panchevska S, Mijoska A, Lazarevska B. Advantages of CAD/CAM versus conventional complete dentures - A review. Open Access Maced J Med Sci. 2018 Aug 4;6(8):1498-1502.

  26. Villias A, Karkazis H, Yannikakis S, Theocharopoulos A, Sykaras N, Polyzois G. Current status of digital complete dentures technology. Prosthesis 2021;3(3):229-44.

  27. Goodacre BJ, Goodacre CJ, Baba NZ, Kattadiyil MT. Comparison of denture tooth movement between CAD-CAM and conventional fabrication techniques. J Prosthet Dent. 2018;119(1):108-15.

  28. Choi JJE, Uy CE, Plaksina P, Ramani RS, Ganjigatti R, Waddell JN. Bond strength of denture teeth to heat-cured, CAD/CAM and 3D printed denture acrylics. J. Prosthodont. 2020; 29: 415-21.

  29. Han SY, Moon YH, Lee J. Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement. J Adv Prosthodont. 2020;12(5):251-58.

  30. Rasaie V, Abduo J, Hashemi S. Accuracy of intraoral scanners for recording the denture bearing areas: A systematic review. J Prosthodont. 2021 Jul;30(6):520-39.

  31. Afrashtehfar KI, Alnakeb NA, Assery MKM. Accuracy of intraoral scanners versus traditional impressions: a rapid umbrella review. J Evid Based Dent Pract. 2022;22(3):101719.

  32. Abduo J, Elseyoufi M. Accuracy of intraoral scanners: a systematic review of influencing factors. The European Journal of Prosthodontics and Restorative Dentistry. 2018 Aug;26(3):101-121.

  33. Kontis P, Güth JF, Schubert O, Keul C. Accuracy of intraoral scans of edentulous jaws with different generations of intraoral scanners compared to laboratory scans. J Adv Prosthodont. 2021 Oct;13(5):316-26.

  34. Mohamedin SM, Komiha AM, Aboelroos AE, Mosaad MM, Swelem AA. Can digital scans replace conventional impressions for complete denture fabrication? A scoping review. J Prosthet Dent. 2026 Feb;135(2):319-330.

  35. Lo Russo L, Ciavarella D, Salamini A, Guida L. Alignment of intraoral scans and registration of maxillo-mandibular relationships for the edentulous maxillary arch. J Prosthet Dent. 2019 May;121(5):737-40.

  36. Lee H-J, Jeon J, Moon HS, Oh KC. Digital workflow to fabricate complete dentures for edentulous patients using a reversing and superimposing technique. applied sciences. 2021; 11(13):5786.

  37. Lo Russo L, Salamini A. Removable complete digital dentures: A workflow that integrates open technologies. J Prosthet Dent. 2018 May;119(5):727-732.

  38. Punj A, Fisselier F. Digital dentistry for complete dentures. A review of digital dentistry versus conventional approaches to complete dentures. Decisions in Dentistry. September 2020;6(8):12-14,16.

  39. Soeda Y, Kanazawa M, Arakida T, Iwaki M, Minakuchi S. CAD-CAM milled complete dentures with custom disks and prefabricated artificial teeth: A dental technique. J Prosthet Dent. 2022 Jan;127(1):55-58.

  40. D’arienzo LF, Casucci A, Manneh P, D’arienzo A, Borracchini A, Ferrari M. Digital workflow in complete dentures: A narrative review. © ARIESDUE 2020; 12(4):743-50.

  41. Herpel C, Tasaka A, Higuchi S, Finke D, Kühle R, Odaka K, Rues S, Lux CJ, Yamashita S, Rammelsberg P, Schwindling FS. Accuracy of 3D printing compared with milling - A multi-center analysis of try-in dentures. J Dent. 2021 Jul;110:103681.

  42. Abualsaud R, Gad MM. Flexural strength of CAD/CAM denture base materials: Systematic review and meta-analysis of in-vitro studies. j Int Soc Prev Community Dent. 2022 Apr 8;12(2):160-70.

  43. Srinivasan M, Kamnoedboon P, McKenna G, Angst L, Schimmel M, Özcan M, Müller F. CAD-CAM removable complete dentures: A systematic review and meta-analysis of trueness of fit, biocompatibility, mechanical properties, surface characteristics, color stability, time-cost analysis, clinical and patient-reported outcomes. J Dent. 2021 Oct;113:103777.

  44. Charoenphol K, Peampring C. Fit Accuracy of Complete Denture Base Fabricated by CAD/CAM Milling and 3D-Printing Methods. Eur J Dent. 2023 Jul;17(3):889-894.

  45. Hassanpour M, Narongdej P, Alterman N, Moghtadernejad S, Barjasteh E. Effects of Post-Processing Parameters on 3D-Printed Dental Appliances: A Review. Polymers (Basel). 2024 Oct 1;16(19):2795.

  46. Afridi A, Rashid AA, Muammer Koç. Recent advances in the development of stereolithography-based additive manufacturing processes: A review of applications and challenges. Bioprinting, 2024; 43:e00360, ISSN 2405-8866.

  47. Pugalendhi A, Ranganathan R, Ganesan S. Impact of process parameters on mechanical behaviour in multi-material jetting. Mater. Today Proc. 2021;46:9139–9144.

  48. Kumar K., Kumar G.S. An experimental and theoretical investigation of surface roughness of poly-jet printed parts. Virtual Phys. Prototyp. 2015;10:23–34.

  49. Gibson I., Rosen D., Stucker B., Khorasani M. Additive Manufacturing Technologies. Volume 17 Springer; Cham, Switzerland: 2021.

  50. https://www.avadent.com/wagner-ez-protocol/ accessed 3/30/26.

  51. Solomon EG, Arunachalam KS. The incisive papilla: a significant landmark in prosthodontics. J Indian Prosthodont Soc. 2012 Dec;12(4):236-47.

  52. Park C. A comprehensive narrative review exploring the current landscape of digital complete denture technology and advancements. Heliyon. 2025 Jan 10;11(2):e41870.

  53. John AV, Abraham G, Alias A. Two-visit CAD/CAM milled dentures in the rehabilitation of edentulous arches: A case series. J Indian Prosthodont Soc. 2019 Jan-Mar;19(1):88-92.

  54. Arzani S, Khorasani E, Mokhlesi A, Azadian S, Ghodsi S, Mosaddad SA. How does the bonding strength of reline materials and denture teeth vary between 3d-printed and milled complete denture bases? A Systematic Review and Meta-Analysis. Clin Exp Dent Res. 2025 Oct;11(5):e70234.

  55. Awad AN, Cho SH, Kesterke MJ, Chen JH. Comparison of tensile bond strength of denture reline materials on denture bases fabricated with CAD-CAM technology. J Prosthet Dent. 2023 Apr;129(4):616-622.

  56. Hassan B, Greven M, Wismeijer D. Integrating 3D facial scanning in a digital workflow to CAD/CAM design and fabricate complete dentures for immediate total mouth rehabilitation. J Adv Prosthodont. 2017 Oct;9(5):381-386.

  57. Lo Russo L, Salamini A, Troiano G, Guida L. Digital dentures: A protocol based on intraoral scans. J Prosthet Dent. 2021 Apr;125(4):597-602.

  58. Alfaraj A, Limones Á, Ahmad S, Aljubairah F, Albalaw S, Albesher M, Alghamdei B, Lin WS. Harnessing AI in prosthodontics and implant dentistry: An umbrella review of systematic evidence. J Prosthodont. 2026 Feb;35(2):127-142.

0/16Next